Hosit Remote Control


Someone has a ceiling mounted 110v hoist that he needs to control wirelessly. It is currently controlled by hanging pendants. He just wants the proper wireless system.

AC 100~240V Motor Momentary Remote Control (S1FM-AC220+1CV-2-2) is quite suitable. It is specially designed for controlling motor of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors, hoist or other appliances and mechanicals. With universal power input, it supports voltage of AC 100V-240V, which can be widely used in many countries, such as the U.S, Canada, UK and France.

remote control& hoist

Connect live wire to terminal “L” and neutral wire to terminal “N”. Then connect AC motor of hoist to terminals “UP”, “COMMOM” and “DOWN” directly. Or he can control his hoist through controlling hanging pendants. He can exchange “UP” and “DOWN” wires of motor to change the rotating direction of motor.

circuit

1. Remote Controlling by transmitter:

Press and hold button ▲ on remote : Terminals UP and COMMOM directly output AC110V / AC220V; motor rotates continuously in positive direction.

Release button ▲ on remote : Stop the motor.

Press and hold button ▼ on remote: Terminals DOWN and COMMOM directly output AC110V / AC220V; motor rotates continuously in reversal direction.

Release button ▼ on remote : Stop the motor.

2. Remote Controlling by manual button on the receiver:

Besides the controlling with transmitter, he  can also control device with manual button on the receiver. Controlling

receiver with manual switch

Note: Button ■ on receiver is useless.

Momentary 30A 12V Remote Control for Reversing Motor


One of our customers is  trying to purchase a remote that will control a 20 amp 12volt dc motor in both directions momentarily. He is wondering whether there is  a remote be set with left and right arrows? He only requires 1 motor to be controlled.

Answer:

We recommend the heavy-duty motor remote model—0020526 (S1PF-DC12+1CV-2-2). It is designed to control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V. The maximum working current is 30amp. So you will be satisfied with it. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance (within 500m/ 1500ft); the wireless signal can pass through walls, floors and doors.

The wiring is fairly simple. Connect power supply DC12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”.

Control mode Momentary: Only connect Jumper-1 (CN1) Press and hold button ▲: motor rotates in positive direction. Release button: motor stops

Press and hold button ▼: motor rotates in reversal direction. Release button: motor stops

Short Video: